Domestic or commercial
Choose only from products whose classification and warranty support the expected traffic, cleaning and activity. A design name alone does not establish suitability.
Sheet vinyl | Roll widths | Measuring | Fitting
Vinyl flooring for practical rooms and clean fitting
Browse sheet vinyl with installer-led guidance on roll widths, joins, pattern direction, preparation and fitting.
Mobile showroom, expert advice, measuring, preparation and fitting across Tipperary and Limerick.
Why choose this range
Practical flooring advice before product selection.
Sheet vinyl is practical, comfortable and cost-effective for many busy rooms, but accurate measuring and a smooth base matter.
Practical and easy to clean
Comfortable underfoot for kitchens and utilities
Good value for rental and family spaces
Wide choice of designs and widths
Clean finish when measured and fitted correctly
Sheet vinyl buying guide
Choose sheet vinyl around the room, roll width and subfloor.
Sheet vinyl is resilient flooring supplied from a roll and cut for the room. Cushion vinyl is a sheet-vinyl construction with a cushioned backing or layer. Domestic and commercial products vary, so the exact use classification, width, surface, slip data, backing, preparation and installation method must govern the choice.
Roll width and seams
The available width and room dimensions determine whether a single piece can work. Large, connected or unusually shaped areas may need a planned seam and installer review.
Water and slip guidance
Do not assume every vinyl is waterproof or slip resistant. Check the exact product, installation, joins, perimeter, maintenance and test information.
Preparation first
Sheet vinyl follows the surface beneath it. Unevenness, contamination, movement or moisture can show through or affect the installation.
Product comparison
Sheet vinyl, LVT or laminate?
| Decision | Sheet vinyl | LVT | Laminate |
|---|---|---|---|
| Format | Continuous flooring cut from a roll. | Individual resilient planks or tiles. | Locking planks with a decorative surface over a supporting core. |
| Installation | Cut, positioned and secured using the specified method; joins and coving depend on product and project. | Bonded glue-down or floating click installation, depending on product. | Normally a floating system with specified base or underlay and expansion detail. |
| Subfloor | A smooth, dry, stable surface is essential because imperfections can telegraph through. | Glue-down requires precise preparation; click also requires a flat, stable base. | Requires a flat, dry, clean and stable base within product tolerances. |
| Water | Some products carry water-related claims, but seams, perimeters, subfloors and installation remain part of the system. | Resistance varies by product; joints and a wood-based core require the exact guidance. | |
| Best starting point | Rooms suited to a continuous resilient surface and verified roll-width plan. | Projects suited to modular resilient flooring and its fitting system. | Product-approved rooms where a floating plank system suits the use. |
Room suitability
Match the exact sheet vinyl to the room and users.
Bathrooms
Use only a product and installation approved for the area. Water can still reach edges, seams, penetrations or the subfloor; sheet vinyl does not waterproof the room.
Kitchens and utility rooms
Consider spills, appliances, heat, cleaning, indentation and entrances. Check the exact surface, use classification and installation guidance.
Rental and family homes
Easy cleaning can be valuable, but wear, indentation, staining and repair expectations vary. Choose evidence for the expected use rather than price or pattern alone.
Commercial spaces
Confirm use class, slip data, wear specification, installation, seam treatment, maintenance and warranty for the activity and traffic. Domestic vinyl must not be assumed commercial.
Slip resistance and moisture
Use the exact test data and installation specification.
Slip resistance is product- and condition-specific. A textured appearance, cushion backing or the word vinyl does not prove a particular result. Check verified test information for the intended domestic or commercial setting.
Sheet vinyl can resist water at its surface where the product says so, but moisture below the floor is a separate risk. The subfloor, damp evidence, adhesive, seams, edges and penetrations must be assessed.
Also confirm roll width, overall construction, backing, wear information, acoustic guidance, cleaning method and warranty for the selected design.
Preparation and installation
A smooth sheet-vinyl finish starts below the flooring.
Assess the base
Confirm substrate type, flatness, stability, condition and moisture risk. Existing coverings, contamination, cracks or movement can change the preparation plan.
Smoothing compound
A compatible primer and smoothing compound may be required to prevent defects showing through. Product choice and depth depend on the substrate and verified site conditions.
Plan seams and direction
Where the room exceeds the available width or layout allows no single-piece cut, seam position, pattern direction and material use require a deliberate cutting plan.
Use the specified fitting method
Loose-lay, perimeter-secured, fully bonded or specialist commercial methods must follow the exact product and project specification. Do not substitute a generic adhesive rule.
Measuring and calculator
Plan the cut from the selected product width.
Measure maximum dimensions
Record the furthest length and width, including alcoves and door areas. Keep separate rooms and unusual sections identifiable.
Open the chosen product
Select the available width and use its calculator where provided. It applies the governed width and cutting logic rather than a generic square-metre estimate.
Confirm seams and fitting
Joins, connected rooms, direction, awkward shapes and commercial details need installer review before the final cut is ordered.
Cleaning, lifespan and local service
Protect the surface and the installation beneath it.
Remove grit, use suitable entrance protection and furniture feet, clean spills promptly and follow the exact manufacturer instructions. Avoid unsupported chemicals, abrasive methods, steam or flooding.
There is no responsible universal lifespan for sheet vinyl. Product construction, traffic, preparation, fitting, seams, moisture and maintenance all influence performance and warranty.
Arra Flooring provides installer-led advice, measuring, preparation and fitting across Tipperary and Limerick, with other suitable projects considered individually.
Sheet vinyl questions
Answers before you choose.
What is sheet vinyl flooring?
Sheet vinyl is resilient flooring supplied from a roll and cut for the room. Width, construction, backing, use class and installation method vary by product.
What is cushion vinyl?
Cushion vinyl is a sheet-vinyl construction with a cushioned backing or layer. Comfort, thickness, wear and room suitability still depend on the exact product.
How does sheet vinyl compare with LVT or laminate?
Sheet vinyl is cut from a roll; LVT uses resilient planks or tiles; laminate normally uses locking planks with a supporting core. Preparation, water guidance, fitting and repair differ.
Is sheet vinyl waterproof?
Do not treat every sheet vinyl or installation as waterproof. Check the product, seams, edges, penetrations, subfloor moisture and fitting specification.
Is sheet vinyl suitable for bathrooms, kitchens or utility rooms?
It can be where the exact product and installation support the room. Spills, appliances, edges, moisture, cleaning and slip guidance must all be considered.
Can domestic vinyl be used commercially?
Not unless its classification and warranty support that use. Commercial projects also require the correct preparation, slip data, seam treatment, fitting and maintenance plan.
Will sheet vinyl need a seam or smoothing compound?
That depends on room size, roll width, layout and substrate condition. A seam may be required where one piece cannot cover the area; compatible smoothing may be needed for a suitable base.
How long does sheet vinyl last?
There is no single lifespan. Product construction, use, preparation, installation, moisture, seams and maintenance all influence performance.
Installer-led advice
Measure first if the room is not straightforward.
Roll widths vary by product. Check the product page or request a measure for accurate guidance. Quantity depends on room size, available roll width, joins, pattern direction and waste.
Common questions
Answers before you browse.
Can Arra Flooring measure before I order?
Yes. Dave can bring selected samples where available, measure the room, assess the subfloor and provide a supplied-and-fitted quotation.
How is sheet vinyl sold?
Sheet vinyl is normally cut to the required size from a roll. Once cut it may be non-returnable unless faulty or supplied incorrectly.
Will the subfloor show through?
It can. Sheet vinyl usually needs a smooth, dry and stable surface because imperfections may show in the finished floor.
Browse our collection
Review products, then ask for advice before ordering if unsure.
For fitted projects, Dave can confirm measurements, selected samples where available, subfloor preparation, trims and timescales before you commit.
Continue your flooring plan
Compare the finish, preparation and fitting journey
Move between the main flooring guides, then confirm product suitability, quantities, floor preparation and installation details before ordering.
Complete the flooring system
What else might the room need?
The surface flooring is only one part of a successful installation. Use these next steps to identify what may be needed, then ask Arra Flooring where product or subfloor compatibility is not yet confirmed.
Smoothing and preparation
Sheet Vinyl can show subfloor imperfections. Moisture, flatness and surface condition determine the preparation route.
Plan Floor PreparationPrimer and adhesive
Do not choose adhesive or primer by category alone. The Vinyl construction, backing, subfloor and manufacturer guidance must match.
Confirm Product CompatibilitySeams, transitions and fitting
Commercial seams, weld systems, doorway transitions and finishing methods depend on the exact product and installation specification.
Arrange Measure & Fitting AdviceCompatibility safety: where the exact product, subfloor or installation system is uncertain, ask Arra Flooring before ordering. No product is recommended solely because it shares a category.
Arra Flooring
TEX R11 4M FELT-BACKED SHEET VINYL
Regular price
€23,52/m²
Sale price
€23,52/m²
Regular price
/m²
Unit price
Signature
R11 Safety Flooring Ireland for Enhanced Protection
Regular price
€33,00/m²
Sale price
€33,00/m²
Regular price
/m²
Unit price
Arra Flooring
Phloor Eclipse R11 Sheet Vinyl – 12 Designs
Regular price
€27,52/m²
Sale price
€27,52/m²
Regular price
/m²
Unit price
Free home measure
Seen something suitable? Get it measured before you commit.
Dave can bring selected samples where available, check quantity, confirm preparation, explain fitting and quote the full supplied-and-fitted job.
Sort by
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
